GRP OIL INTERCEPTOR

Pollution prevention is a critical part of sustainable drainage systems and verified oil seperators are designed to protect the environment and prevent pollution of our rivers and streams by containing hydrocarbons (e.g. diesel, petrol or engine oil) that have entered a drainage network.

There are statutory regulations in force to control the discharge of hydrocarbons, with severe penalties imposed for non compliance. The environment agency’s PPG3 guidelines are issued to enable you to comply fully with the current legislation on environmental protection.

Microstrain have teamed with Conder to provide a range of oil separators that conform to both the Environment Agency’s latest PPG3 guidelines and European standard BSEN-858-1-2 and a re proven to separate oil and water.

Conder Separators are defined in two classes;

Class 1 – designed to achieve a concentration of less than 5mg/l of oil under standard test conditions. These separators are required for discharges to surface water drains and the water environment.

Class 2 – designed to achieve a concentration of less than 100mg/l oil under standard test conditions and are suitable for dealing with discharges where a low quality requirement applies such as discharges to foul sewer.

Both classes can be produced as Full Retention, Bypass or Forecourt Separators.

• Innovative design makes units small and easy to handle 
  
  
• Fully compliant to the Environment Agency’s PPG3 guidelines
  
  
• Competitively priced and major installed cost savings
  
  
• Fully tested and verified with a range from NSB1.5 to NSB1000 for bypass and NS4 to NS100 for full retention (class 1&2)
  
  
• Full BSI certification
  
  
• Easy to service
  
  
• Automatic closure devices fitted as standard on full retentions and forecourt units